HR4013C SDS Max Rotary Hammer With AVT 240V

  • Rp 8.000.000
IDR 8000000
  • Availability: In Stock

Makita HR4013C Rotary Hammer with SDS max and AVT, complete with carrying case, bit grease, depth rod and side handle

The Makita HR4013C was developed to provide higher operating efficiency and more comfort with unrivalled low level of vibration. Compared to the previous model HR4011C this machine gives 20% higher drilling efficiency and 45% higher chipping efficiency. With Rotary Hammer 4.5m/sec² and Hammer 5.0m/sec² vibration levels it makes this the worlds first 8 hour SDS-MAX rotary hammer.


One touch sliding chuck for easy bit installation and removal

Easy to operate operation-mode change lever. Located on the top of the motor housing for reduced possibility of breakage

"Soft no load" function automatically reduces the motor speed during idling to suppress the vibration of the machine body

Unrivalled low level of vibration aided by vibration absorbing housing

LED service light indicates when to replace carbon brush

In hammering mode, on/off switch is switchable between two switches to meet your application: For Continous or Intermittent chiseling applications COMES WITH:

Heavy duty carrying case

Side handle

Depth stop

Grease tube Impact energy: 8.0 J

Max in concrete: 40 mm

No Load Speed: 250 - 500 rpm

Vibration - Chiselling: 4.5 m/sec²

Vibration - Hammer Drilling: 5 m/sec²

Vibration K factor: 1.5 m/sec²

Impacts per minute: 1450 - 2900 ipm

Input Wattage: 1000 w

Net weight with pipes: 6.8 kg

Total Shipping Weight: 11kg